Industrial automation

    Rhenishaw ext-trigger to latch position

    Event counting

    Linear Scale F/B

    Frequency counter

    Servo encoder F/B

    Pulse signal receiver /display

    CCD inspection F/B

High noise immunity with photo-coupler isolation

High speed of receiving pulse up to 2M pps

Each counter possessed 32bit data width

Presetable temporary buffer to load counter by external trigger or software trigger

Multiple counter reset (homing) modes

Latch counter to temporary buffer by external trigger

Programmable multiply rate at X1, X2, X4

Security password blocks illegal copy of IP software

LED on touch probe flashes at hardware synchronized with probe activity status

Software key function

Photo coupler Isolation Voltage : 2500 Vac 1 min

Isolation Resistance : 100M Ohm(min)1000Vdc

Counter width : 32 Bits

Card ID : 4 bits

Input channel :3 channels X, Y, Z, totally 3 compatible device units can be hooked

Input signal type : photo-coupler isolated single-end input

Input pulse multiply rate : X1, X2, X4 programmable (quadrature signal only)

Input Mode : (QUADRATURE), (CLOCK/DIRECTION) ,(UP CLOCK/ DOWN CLOCK)

Zero input per channel : 1 for Home detecting

Latch input : 2 for external trigger to latch counter data to buffer

General input : 1 ,with general type of photo-coupler

Maximum counter speed : Max. 2MHz

Homing (reset) counter method : one software trigger mode and four H/W trigger mode

Polarity : all input signals are software programmable

Operation temp - 0 to 70 degree C

Operation humidity : RH5~95%, non-condensing

Dimension : 130(W)*100(H)mm

DIN rail mounted wiring board

Dimension : 92*(L)*85(W)*52(H)mm

PRODUCT

DESCRIPTIONS

1

 LSI-3123

 3-axis Quadrature Encoder Counter Card

2

 JD50050

 DIN rail mounted wiring board (D type 25p male to terminals)

3

 M270325X4

 D type 25p male-female cable 180cm

4

 JD52000

 Power supply (s-35-24), input 115VAC  0.8A ; 230VAC 0.45A ,

 output 24V  1.5A