SPECIFICATIONS |
Main Card -- Counter
(Encoder) input
|
|
Number of axes: 3, independent
|
|
Max. quadrature input frequency: 1 MHz
|
|
Max. Input pulse frequency: 1 MHz
|
|
Encoder Type: Single-end
|
|
Counter per encoder cycle: x1, x2, x4 (Software select)
|
|
Counter size: 24 bits
|
|
Counter modes: Quadrature, up/down, pulse/direction (Software select)
|
|
Sample clock frequency: 14.318 MHz |
|
Software homing (reset) counter method: 1 software trigger |
|
Hardware homing (reset) counter method: 1 H/W trigger
|
Main Card -- Digital Input |
|
Home: 1 per axis
|
|
ON state: 2.8Vdc(max) 4.5mA(min)
|
|
OFF state: 8Vdc(min) 3mA(max)
|
|
Polarity: DIP switch selected the polarity for Z phase and
HOME input signal
|
|
Switching speed: 2.2KHz max. ( with on board debounce circuit)
|
Main Card --
General |
|
Photo isolation: All digital I/O and counter Input |
|
Insulation resistance: 100M Ohm (min) at 1000Vdc |
|
Isolation voltage: 2500Vac 1Min |
|
External power supply : +12V ~ +24V |
|
DC converter voltage : +5V |
|
DC converter current : 0.5A |
|
Connector : One 25-pin D - type female connector |
|
Operation temperature: 0 to +70 degree C |
|
Storage temperature: -20 to +80 degree C |
|
Operation humidity: 5~95% RH, non-condensing |
|
Dimensions: 175(W)*108(H) mm |
Wiring board |
|
External supply : DC 24V±4V |
|
Specific input : 3-Axis A+, A-, B+, B-, Z+, Z- |
|
Connector : One D - type 25-pin male connector |
|
Operation temperature : 0 to 70 degree C |
|
Operation humidity : RH5~95% , non-condensing |
|
Dimension : 112(W)*110(H)mm |