Industrial automation

    Touch probe/non-touch probe trigger to latch position

    Event counting

    Linear Scale F/B

    Frequency counter

    Servo encoder F/B

    Pulse signal receiver /display

2 MHz max. Quadrature input rate

Four 32-bit counters

Quadrature, pulse/direction and up/down counting

Programmable multiply rate at X1, X2, X4

Load preset value to counter by external trigger or software trigger

Latch counter value by external trigger

Multiple counter reset (homing) modes

Differential or single-end input signal

Compare out (0.3s one shot) at X,Z axis

Supports DIN rail mounted wiring board

Number of axes: 4, independent

Max. quadrature input frequency: 2 MHz

Max. Input pulse frequency: 4 MHz

Encoder Type: Single-end or differential

Counter per encoder cycle: x1, x2, x4 (Software select)

Counter size: 32 bits

Counter modes: Quadrature, up/down, pulse/direction (Software select)

Sample clock frequency: 8 MHz

Software homing (reset) counter method: 1 software trigger

Hardware homing (reset) counter method: 5 H/W trigger

Main Card -- Digital output

Home: 1 per channel (Single-end or differential)

Latch: 1 per channel (Single-end or differential)

Clear counter: 1 per channel (Single-end or differential)

General input: 1 per channel

Polarity: non-inverting / inverting, all input signals are software programmable

ON state: 2.8Vdc(max) 4.5mA(min)

OFF state: 8Vdc(min) 3mA(max)

Switching speed: 2.2KHz max. ( with on board debounce circuit)

Clear Output: 1 per channel

General output: 1 per channel

Polarity: non-inverting / inverting, all output signals are software programmable

Output range: Open drain 0 ~ 100 Vdc

Sink current: 1A(cont) per channel

Switching speed: 20KHz(max) ( MOS out only)

Main Card -- General

Photo isolation: All digital I/O and counter Input

Insulation resistance: 100M Ohm (min) at 1000Vdc

Isolation voltage: 2500Vac 1Min

Connector: One 68-pin mini-SCSI female connector

Operation temperature: 0 to +70 degree C

Storage temperature: -20 to +80 degree C

Operation humidity: 5~95% RH, non-condensing

Dimensions: 178(W)*115(H) mm

DIN rail mounted wiring board

External supply : DC 24V&plusmn4V

On board build-in s.p.s : DC+5V 500mA (Max.)

Specific input : 24   

General input : 4 with LED indicator

General and specific output :   

     LSI3104DIN(N) - 8 N - MOS (Sink 1A 120VDC) with LED indicator

     LSI3104DIN(R) - 2 N - MOS (Sink 1A 120VDC)  and 6 relays ( 3A 250VAC , 3A 30VDC)

     with LED indicator

Single end / differential selectable DIP switch : for 8-bit DIP switches

Specific encoder / linear scale input connector : for 8-pin connectors                                

Connector : One 68 - pin SCSI - II female connector

Operation temperature : 0 to 70 degree C

Operation humidity :  RH5~95% , non-condensing

Dimension : 200(W)*72(H)mm

PRODUCT

DESCRIPTIONS

1

 LSI-2104

 4-axis Quadrature Encoder Counter Card

2

 LSI-3104DIN(N)

 DIN rail mounted wiring board for LSI-3104/2104,

 General outpu t: 8 power N - MOS

3

 LSI-3104DIN(R)

 DIN rail mounted wiring board for LSI-3104/2104,

 General output: 2 power N - MOS and 6 relays

4

 M266868150

 68 - pin SCSI II cable 1.5M

5

 M266868300

 68 - pin SCSI II cable 3.0M

6

 JD52000

 Power supply (s-35-24), input 115VAC  0.8A ; 230VAC 0.45A ,

 output 24V  1.5A